Date Subject
Jan-27-12 MB991IK-B FAQ

Q   My SSD/HDD does not display the HDD activity correctly.

o    The HDD activity status LED is largely dependent on the SSD or HDD used. For some SSDs, it may not have the proper function or may not be designed for thito display the activity LED due to changes made in their firmware. Another factor is the host (e.g. motherboard, RAD controller card, etc) as some hosts may be able to interpret the SSDs activity and reprocess it correctly to the MB991IK-B.

Q   Where am I able to purchase extra trays for this model?

o    Extra trays can be found at most online retailers. Please see the following link for more information: http://www.icydock.com/goods.php?id=125
 
Q   Will my particular SSD/SAS drive work with this device?
o    Assuming the SSD you have chosen is a standard 2.5” SATA drive, yes, your SSD will work in these converters. The converters simply pass the SATA power and data connections through to the motherboard/controller card, allowing you to be worry free about drivers, firmware, or compatibility issues.
 
Q   Can this work in my particular computer case?
o    Yes, these converters use the exact form factor of a 3.5” device bay, meaning all connections, dimensions, and mounting holes are the exact same.
 
Q   Will this work with my SAS or SSD/HDD that is bigger than the standard 9.5mm height?
o    Yes. The designs of this model allows for a bigger height clearance up to 15mm and thus, allowing compatibility with these types of drives.

 

>Go back  
social media icons social media icons social media icons social media icons social media icons social media icons social media icons social media icons social media icons social media icons
Copyright © 2022 ICY DOCK. All rights reserved.